Using the Custom Size-Fixed Height Option, you can allow your customer to choose any width for their product. But the height of the product will remain fixed.
This option is used in DTF printing, signs, and custom wallpaper, where the height of the print material is fixed.
For creating an option for the Custom Size -Fixed Height Option, follow the steps below:
Step 1: Hover over to the Products option and select Product Options.
Step 2: Click + Add New Option Set to create a new option set for your product.
Step 3: Click the Select Option Type and choose “Custom Size – Fixed Height” from the dropdown list. Then click the + New Option button.
If you want this custom size-Fixed Height option to be enabled for the Design Lab, just turn on the “Enable” option, and if you don’t want this option in the designlab then select “Disable”.
If you enable the custom size-Fixed Height option for designlab you will get a white blank canvas according to the custom size or preset size that the customer selects on the product page.
Also, you can change the selected custom size-Fixed Height inside the designlab. Blank canvas size will be changed according to the selected size.
Otherwise, click the Disable button if you do not want to show the custom size-Fixed Height option on designlab. By disabling, you will be able to see the original product image that you have uploaded in the Product setup for the design tool (advanced settings). The custom size-Fixed Height option will be shown only on the product page.
It will help your customer to choose their Size Unit on the product page. You can set up the Size Unit Display settings as Multiple Choice in the admin panel.
Inch: This will help your customer to choose the Size Unit as Inch
Centimeter: This will help your customer to choose the Size Unit as Centimeters
Feet: This will help your customer to choose the Size Unit as Centimeter
The size units will be displayed in the Custom Size option in a dropdown. Your customer can choose one of the size units from the front end.
Incremental Factor: You can allow your customer to increase/decrease the value in an incremental factor. For this:
Set it to a round value or a floating point value.
Select the incremental value in inches, centimeters, or Feet units.
The incremental value can be chosen in Inch, Centimeter, and Feet units or for all. Also, you can easily turn on/off the incremental option. If you turn the option “Yes”, then the value will be incremented according to the assigned incremental factor.
Suppose you have set the Incremental value to 2. Then, in the front end, your customer can take the value as 2,4,,6,8 and so on if you turn this option to “Yes”.
But if you turn the option to “No”, then the incremental value restriction will not work.
In this section, you can set the Minimum & maximum measurements for the width of the product in three different calculation units ( inch, Centimetre, and Feet ). Also, you can set the Label of the width & height that matches your product for better understanding.
There is the option to set the Minimum & maximum measurements for the Height but it will not work as the height of the product is already fixed.
7.1 Calculation Unit: This allows you to show your customers on which scale the values of the height & width are set to the custom size box. You can set different minimum-maximum values for different units. It is helpful for both the store owner & the customer to determine the exact value they want for their product.
7.2 Width & Height Label: In the custom field section, you will see two input fields where you can assign values to the Height fields, and the other width is fixed. With a label, you can give a clear indication to your customer to set the proper values for Height.
7.3 Minimum & Maximum Height: You can set the minimum & maximum values for the width. It helps the customers to choose sizes of any value within the store owner’s preferred range. And they can’t exceed the restriction that you’ll set.
7.4 Fixed Height: Here you can set the fixed value for Height taht will be shown in the product page. And customers will not be able to change this field.
You can assign a price for “per square inch”. The set price will be added when a customer selects a custom size. The price is calculated per square inch based on the customer's input for width and height.
From here, you can choose how you want to display the Preset Sizes. There are basically 3 options by which you can display your preset sizes. Radio, Swatch & Select. If you don’t want to display, simply click the Hide button.
For custom size, insert your custom size Title and select Enable if you want to allow customers to enter their custom size for height on the product page. Here field of width will be fixed.
If you do not want to show the custom size option on the product page, you can disable the option by clicking on the disable button.
To show two or more size values, click on the + New size button and then enter the title, & height values, and price. Here, the width will be fixed according to the value you set in fixed width field shown above in step 7(7.4)
If you do not want to offer any preset sizes, you can easily do that by hiding the option.
Feel free to contact us whenever you face any issues or need assistance. We’re available 24/7. You can also reach us:
InkyBay app Live chat
Support ticket from the InkyBay app
Email to support@productsdesigner.com
Getting Started
Products
Designs
Templates
Configuration
Printing
Orders
Inventory Management
Settings
Packages
Uninstallation
Tutorials
FAQ